Product safety: how do I know what is safe?
By Red Nose Australia
Red Nose is often asked by parents and carers whether particular products are safe, including cots, prams, strollers, and mattresses. Check out our tips below for peace of mind when it comes to using products safely.
Pram and stroller safety:
A safe pram or stroller is one that meets the safety standard – AS/NZS 2088:2000. All new and second hand prams and strollers sold in Australia must meet this safety guideline. When using a pram or stroller make sure you:
- Read the instructions carefully before use, especially if it is your first time using the product
Always do up the restraints properly. A baby or child can become tangled in loose restraints that aren’t fastened correctly
- Make sure the footrest on the stroller is strong and secure. A weak footrest can give way and cause your child to become trapped
- Make sure the brakes are on when the pram or stroller is stopped
- Never leave a baby or child unattended or asleep in a pram or stroller
A safe cot is one that meets the safety standard – AS/NZS 2172:2003. All new and second hand cots sold in Australia must meet this standard, and will carry a label to say so. When using a cot make sure you:
- Only use a single, firm mattress that fits snuggly (within 20mm of sides and ends) into the cot
- Make sure the mattress is flat (not elevated or tilted)
- Do not have bumpers, soft bedding or toys in your cot
- Keep your cot away from blind cords and other hanging items
A safe portable cot is one that meets the safety standard – AS/NZS 2195 (portacot). When using a portable cot make sure you:
- Always read the instructions carefully, especially if it is your first time using the portacot
- Only use the firm, thin, well-fitting mattress that is supplied with the portacot
- Never add a second mattress or additional padding over or under the mattress, as a baby can become trapped face down in gaps between the mattress or sides
- Check that there is no wear or tear to your portacot. Only use a portacot that has the mesh intact and no broken parts
- Ensure the base is flat
- Always check your portacot regularly for wear and tear
A safe mattress is one that is the right size for the cot, is firm, clean, in good condition and is placed flat in the cot (not elevated or tilted). When checking that your mattress is safe, make sure you:
- Ensure the mattress complies with the size and depth recommended by the manufacturer of the cot, as a baby or child can get trapped in the gaps of an ill-fitting mattress
- Make sure the mattress is firm and is compliant with the AS/NZS Voluntary Standard (AS/NZS 8811.1:2013 Sleep Surfaces) standard
- Remove the plastic packaging from the mattress before use
- If using a waterproof mattress protector, make sure it is a tight fit
- Never put soft bedding under the bottom sheet, as it makes the mattress surface too soft
Red Nose recommends your baby sleeps on their back, and that their head and face remains uncovered during sleep.
A good way to achieve this is to place your baby in a safe infant sleeping bag with fitted neck and armholes and no hood.
If a blanket is being used instead of a sleeping bag, ensure baby is placed with his/her feet at the end of the cot, tucking the blanket in securely underneath the mattress, so it can only ride up as far as baby’s chest and cannot cover his/her head. There is no need to use a blanket if your baby is in a sleep bag
Make sure there is no soft bedding in baby’s sleep environment. Soft bedding (pillows, doonas, loose bedding or fabric, lambswool, bumpers or soft toys) in the cot is unnecessary and may cover baby’s face and obstruct baby’s breathing.
Note: The views and advice expressed on this blog post are those of the author and are not representative of the Pregnancy Babies & Children's Expo.